Baby Ancestor

The curing speed can be controlled by the temperature and amount of water used.
- When you feel that hardening is fast (summer): Soak the product in water for 3 to 5 seconds, then take it out, shake off the water, and apply.
- When you feel that hardening is slow (winter): Soak the product in water and knead it 3 to 5 times, then take it out of the water and squeeze it again 2 to 3 times to remove the water before performing the treatment.

S & F patented substances

RoboCast contains S&F's patented substances, so it has less stickiness during treatment and has excellent molding properties.

less pressure

Robocast polyester products have good formability due to their excellent elasticity, and because they have weak rebound and recovery force after stretching, there is a low possibility of pressure on the affected area.

Flexibility

Robocast has excellent elasticity in length, width, and diagonal directions, making it advantageous for molding curved areas of the body such as elbows and heels.

Hygiene / Ventilation

Robo Cast provides excellent ventilation, thus preventing itching, foul smells or skin diseases due to moisture inside the cast. Also, if the stockinet cotton bandage made of water repellent material is used, you can take a shower or swim in the pool.

(In such cases, it should be dried properly using a hairdryer set to cool air, and consultation with a doctor is required in advance.)

Environmental friendliness

Robocast polyester products are woven from 100% polyester and can be incinerated at a designated incinerator after use, preventing soil pollution from disposing of waste glass fiber.

Prevention of dripping

Robo Cast Product

forming phenomenon
occurred due to the
dripping down of resin.

RoboCast contains substances to minimize resin shedding during long-term storage.

small amount of dust

polyester

fiberglass

Robocast polyester products generate a small amount of dust when removed after use compared to glass fiber products, and unlike glass fiber dust, they do not scatter into the air or go down.

(In fact, the glass fiber dust (particles) that are harmful to the human body are so small that they are not filtered out by the filters of common vacuum aspirators used in hospitals.)

X-ray transparency